Skip to Content

Three classic mistakes in meeting room design

September 7, 2026 by

Three recurring errors in meeting room projects and why they occur despite the drawing being correct all the way.



A meeting room can look perfect in pictures and still be a disaster to actually sit in. Nadja Tolstoy and Linus Fridén at Tengbom have seen the same types of errors recur in project after project. Not because anyone was careless, but because the drawing rarely reveals how a room will actually be used.

Here are three of the most common.

Cable Christmas tree

The drawing shows an outlet under the table and a nice passage for the cables. In reality, there are five people sitting around the table, each with a laptop, phone charger, and maybe an extra screen. Suddenly, the passage is too small for everything that actually needs to be plugged in. The result is a tangle of cables in the middle of the table, what Tengbom internally calls the cable Christmas tree. It doesn't show up in the drawing, but it becomes visible the first time the room is used by more than two people at the same time.

The floor well that cuts cables

Floor boxes are a common solution to avoid cables across the floor, but they require millimeter precision in both placement and installation. In one of Tengbom's projects, it turned out that the lid of a floor well pinched the cables every time it was closed, because the well had been installed a few centimeters wrong in relation to the furniture. A small mistake in an early stage became a daily irritation for several years to come.

The shark fins that were door slamming

During a visit to a newly occupied office, some strange bumps were discovered in the carpet “shark fins” as someone on the team called them. They turned out to be marks caused by the doors’ swing radius, which no one had anticipated would wear against the floor in this way. A purely geometric problem, invisible in all the drawings but clearly visible after six months of daily use.

The common factor for all three is that they do not involve poor craftsmanship. They are about a meeting room being designed based on a static plan, but living a dynamic life. More laptops than expected, a door that swings at just the wrong angle, and a lid that closes a thousand times a year. It is difficult to completely design out that type of error, but it is possible to make them cheaper to detect. By testing furniture layout and cabling in full scale before everything is cast in concrete and parquet, one can change things before it is too late.

The “cable Christmas tree” is also one of the reasons why Flex Table is designed the way it is. The cable routes are dimensioned for how a room is actually used with more outlets than the initial plans call for, and hidden regardless of whether the power comes from the floor or the wall. Rather than based on how many cables an architect expected to need at the drawing board.

Read more about the table that is designed to meet real usage, not just the estimated: FlexTable | Pendax AB

AV and IT need to be involved earlier than you think